Announcement Announcement Module
Collapse
No announcement yet.
fusion fin box Page Title Module
Move Remove Collapse
Conversation Detail Module
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts

  • fusion fin box

    #1
    Just lost my fusion fin box and fin surfing over rocks. Looking to replace it I notice it comes in two types 5Deg and 9Deg. Does anyone know what was fitted as standard on Alternators
    Tags: None
  • #2
    Cant would probably be set around 7* but check the other plug to be sure. 9* are the front boxes, the 5* the quad rears and the 0* is the centre.

    Comment

    • #3
      Originally posted by prjwebb View Post
      Cant would probably be set around 7* but check the other plug to be sure. 9* are the front boxes, the 5* the quad rears and the 0* is the centre.
      Unfortunately the other side was repaired in Morocco and I cannot see any markings on it. If someone has an alternator they could look at the fin boxes and see if it says what the cant is

      Comment

      • #4
        It will be the 9 degree plug but you can fine tune the exact cant as you set the box in. 7 degrees is pretty common but it's best to measure the other plug with a fin in just to make sure they end up set the same. I imagine the guy doing the repair would do this anyway.

        Comment

        Working...
        X