Announcement Announcement Module
Collapse
No announcement yet.
best thruster fin for addvance Page Title Module
Move Remove Collapse
Conversation Detail Module
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts

  • best thruster fin for addvance

    #1
    SA-1? Whattya think? Thanks in addvance:/
    Tags: None
  • #2
    No fin advice but thought I'd high5 you on the joke!

    Comment

    • #3
      yeah that's a good one. what size addvance are you riding and what do you weigh?

      Cheers

      Comment

      • #4
        I'm only 155 and while the 6'6" might be pefect i'm coming off longer bigger boards and want to catch every wave i can, so i'm heading for a 6'10".

        Comment

        • #5
          yeah you could definitely get on the 606, but you will likely have fun on the 610.

          For fins, if you were Futures, I think the JC1s or the EAs would be great as thrusters. You aren't heavy enough to need super big fins...

          Comment

          • #6
            Thanks Chris, the board I'm looking is in FCS-suggestions on those?

            Comment

            • #7
              also, Chris, in the futures would you do blackstx? or honeycomb?
              Thanks again.

              Comment

              • #8
                You might want to give the FCS Nexus H3 a try. Not sure how they go on an addvance, but on my El Fuego they are superb. I find they add tons more drive than the PC7 and a ton more snap in the turns as well.

                Comment

                • #9
                  Gnubee those are nice. Thanks for the reco.

                  Comment

                  • #10
                    Guy from FCS recommended G AMs. Not sure if those may be too much fin for me.

                    Comment

                    • #11
                      The GAMs are a great fin but I reckon they're too big at your weight. Maybe AM2 instead.

                      Comment

                      • #12
                        Yeah for lighter guys I go bigger fin in small boards and smaller fin in bigger boards unless you're in pumping waves. You want to keep it loose. The board will have tonnes of glide so you shouldn't need lots of fin area to drive off.

                        That's how I see it at least.

                        Comment

                        • #13
                          yeah good stuff there Prj.

                          experimentation always the key!!

                          Comment

                          • #14
                            Gettin the AM-2. I'll start there. Thanks guys.

                            Comment

                            Working...
                            X