Announcement Announcement Module
Collapse
No announcement yet.
Mounting Straps? Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mounting Straps?

    Does anybody know, what size and length metric screws should be to mount footstraps on my Hellfire?
    Last edited by spiral; 03-14-2013, 02:51 PM.

  • #2
    Good question...why not just use the screws that came with your board?

    Comment


    • #3
      Checked the packaging,...no screws included :(

      Comment


      • #4
        Spiral, did you get this addressed? If not PM me and we will make certain to get you some screws.

        Comment


        • #5
          In my suggestion you can try wooden surfboard for skating. Most of the time short surfboards are for beginners. If you can set your body balance while skating then you can easily manage skates.
          Ronwadesurfboards: is an online store of surfboards. Now you can shop surfboards online where we have everthing you need if you're a beginner or have been surfing for years.

          Comment


          • #6
            They are 1.25" stainless steel self tapping wood screws. However, it's always wise to double check the depth of the insert with a toothpick or similar and measure that against the screw length to be certain you won't go to far into the board. You need to account for the strap thickness and any washers as well.

            -Brian

            Comment

            Working...
            X