Announcement Announcement Module
Collapse
No announcement yet.
Need a fix? Page Title Module
Move Remove Collapse
Conversation Detail Module
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need a fix?

    #1
    FireWire boards are similar to most epoxy boards in terms of board repair. If your not comfortable repairing yourself, one of the following shops can help.

    http://www.firewiresurfboards.com/ki...ng/repairs.php
    Tags: None
  • #2
    Portugal - boards to fix

    Dear All,

    Where can I fix my board here in Portugal?

    A while ago, I went to a fix company which was supposedly certified by Firewire (Red Eyes) and the result was completely disaster - in order to repair a broken (punched in reef) nose they add about 1kg to my lovely flexfire direct drive.

    So, now I have a similar problem with my MB and I don't want to loose another brand new beautiful board and if you could give me an alternative.


    Many thanks,

    Filipe

    Comment

    • #3
      Hey Filipe I am not sure where in Portugal you can go for a repair. Best bet would be to start with your local shop and go from there.

      Good luck!!

      Comment

      • #4
        I've recently put two or three pressure dings in my Hellfire. They are hardly noticeable at all but I'm wondering if I should just leave it be or have a shop take a look. There's no signs of cracking and the dings are only 2-3 mm deep and about the size of a nickel.

        Comment

        • #5
          Hi,
          If there are no cracks or if its not in a high stress area like the section of the board between both feet or right on the rail you should be safe.
          Just please fix anything that can let water in .
          Regards
          Felix

          Comment

          Working...
          X