Can someone clear something up for me...
I'm getting conflicting results for the volume of the 5'10 Alternator - some websites say 25.9 and some 26.9, on the FW site it has the Alt board page saying 25.9 and the CBD page for the stock 5'10 at 26.9. Which is right and which is wrong?
It's the difference of buying or not buying. Thanks.
Thanks prj - after much enthusiasm for the 5'10 stealth i though the rocker might be a little flat as a step up, my other reasoning is owning a 5'6 with 28l float is fine being so short and made to catch small waves but do i really want to ride a 5'10 the same...the more i think about it maybe not.
I'm only 5'9 and 65-68kg (fluctuates with my 125 mile a week commute by bike) but what do you reckon, I've not seen a alternator in person but heard they have quite a bit under the belly and a reasonably full rail. My 5'10 Futura at 26'7 was more than enough float.
I reckon it'll be a good board. I always fancied the 6'0" myself. It'll probably cover you for 80% of conditions!
Yeah it will mainly be a Cornwall/Devon board and good days back home (chest to over head type stuff)
Volumes are confusing these days as poly boards just came as a size and if it worked, it worked, ask a shaper 5 years ago what the float was and i imagine you'd get a reply of...err good!
Chris, can you ask your web guys to update the site to show the correct volume. (if possible)
5'10 Alternator on its way, just gotta wait till Sept.
Hopefully between this and my beloved 5'6 Spit i should have all my bases covered!
I nearly went for the 5'11 hellrazor but i think the rails, nose and tail are a lot more refined and the rocker is slight more curved.
I'm still being told the 5'10 Alt is 25.9l? - Hard to know when the FW site says the same...Chris, got one of those near you?
Im on a HF 5'8 27,2 vol. and try the alt 5'10 which felt like it has much less volume. Still its a sic board :)
The CBD file for the stock 510 is literally the file that cuts the board. I'd take that as accurate.
Originally Posted by Baker
What does the board compare tool have it as?
Hmm board compare is saying 25.9l.
I've just made up a CBD file with a slight modification to the 510 to get it as close to stock as possible and got 26.97l.
Looking at the dims of the 508, 510 and 600, 25.9l seems like a more logical volume for the 510. Nearly 27l is too close to the 600 considering the board jumps up 2" in length, 0.25" in width and 0.12" is thickness. The 508 to the 510 all that changes in the length so it makes sense that it'd be closer to that than the 600...
That has me more confused to yeah, I'd wait to see what Chris says.