Results 1 to 3 of 3

Thread: Custom Alt. how wide and thick is too much??

  1. #1
    Certified
    Join Date
    Jan 2012
    Posts
    41

    Custom Alt. how wide and thick is too much??

    i'm 6'4" 205 lbs and ride the 6'8" 20 1/4" and 2 3/4" alt and like it quite a bit but would love to get to a board closer to my height so i can get my feet in the right place. my front foot is where it belongs but my back foot is on the front of the traction pad in front of the two fins. not good. i don't really have room to widen my stance. it's pretty wide. i was wondering about going 6'4" with the same volume. say 21" and 3"? anyone know of any problems with that. it seems the obvious to me but if it was the best idea i guess we'd see boards start getting wider and thicker after 6'4" (assuming few surfers over 6'4") but they don't. they just keep the dims relative and scale longer and longer for those who need more float. is that because they're just scaling the ideal board they made at 5'11" and want to keep the same dims or are those the necessary proportions for the best performance?

    basically i'm asking is it crazy to add 1 1/4" in width and 3/8" thickness to the stock 6'4"?

    how would it handle compared to the stock 6'8"?

    am i write in assuming that getting on a board my height will help me have my back foot were it belongs (or at least 2" closer. 2" off the front of the board, 2" off the back of the board).

    thanks,

  2. #2
    Elite
    Join Date
    Dec 2011
    Location
    Sydney Australia
    Posts
    767
    I reckon that's too much. I don't even think the CBD program would permit such a big variation.

    I reckon if you went 20.25" and 2.75" you'd be pretty close. You might even consider those dimensions in a 6'6". You could even up the thickness a tad to 2 13/16" or 2 7/8". You could do that in either length. That would help keep the same volume.

    I surf a 6'8" and have foot placement issues from time to time but I'm only 5'9.5". I would have thought at 6'8" the Alt would be pretty close to an ideal length for you. 6'6" for sure. Dan Ross is around 6'2", was a world tour surfer, and his main board is or was a 6'5" I think. Even now Jordy at around 99kg and 6'2" or so has a go to board around the 6'3" mark.
    Last edited by buzzy; 02-23-2013 at 03:50 PM.

  3. #3
    I rode the 604 alt at 95+ kgs and it was more than enough volume then...too much in juice...stance is one thing that the shorter board may help, but i would be wary about thickening the board more...it was already thickened a while back to separate it from the flexfire...if you will only slide along slower flat faces then maybe, but steep and fast may get challenging... if you are a competent surfer you should look at dropping that volume down...only feels hard for a week or two... btw.. the stock 604 is a great board if you can dominate it...which you will be able to do...one board quiver
    INSTAGRAM .... corepersonaltraining

    6ft..90ish kg..35+ years surfing

    WHERE'S MY VANGUARD, WHERE'S MY VANGUARD, WHERE'S MY VANGUARD, WHERE'S MY VANGUARD,*WHERE'S MY VANGUARD.... ETC
    IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED,
    IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED,
    IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT,
    IT'S HERE, IT'S HERE IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE,
    IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE

    SWEET POTATO--- R/F -- 5'4 -------------------------- fins controllers
    VANGUARD -------- WRF -- 5'6 ------------------------- fins futures ea blackstix..may test something a little bigger and stiffer
    HELLFIRE ----------- R/F -- 5'10 ------------------------ fins futures SA3,SA4 honeycomb
    FLEXFIRE ----------- R/F -- 6'2 x 18 3/4 x 2 1/2 ------ fins futures JC honeycomb
    MICHEL BOUREZ------------6'2 --thick then thin ------- fins futures JC honeycomb, AM2 techflex heavy chop, ea b/stix at 84kg, now testing AM2 hex
    ALTERNATOR ------ R/F -- 6'4--for bad back days---- fins futures JC honeycomb

    and countless others (mostly nev's)

    youngest grommet 45kgs throws my hellfire around with SA3's or in mush uses EA (techflex "cuz they look da bomb") and deviant

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •