Page 5 of 6 FirstFirst 123456 LastLast
Results 41 to 50 of 52

Thread: Biggest waves you surfed on your Dominator?

  1. #41
    woo hoo..!!...feedback when tested mate...
    Last edited by core personal training; 03-13-2012 at 10:05 PM. Reason: kant spel good
    INSTAGRAM .... corepersonaltraining

    6ft..90ish kg..35+ years surfing

    WHERE'S MY VANGUARD, WHERE'S MY VANGUARD, WHERE'S MY VANGUARD, WHERE'S MY VANGUARD,*WHERE'S MY VANGUARD.... ETC
    IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED,
    IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED,
    IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT,
    IT'S HERE, IT'S HERE IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE,
    IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE

    SWEET POTATO--- R/F -- 5'4 -------------------------- fins controllers
    VANGUARD -------- WRF -- 5'6 ------------------------- fins futures ea blackstix..may test something a little bigger and stiffer
    HELLFIRE ----------- R/F -- 5'10 ------------------------ fins futures SA3,SA4 honeycomb
    FLEXFIRE ----------- R/F -- 6'2 x 18 3/4 x 2 1/2 ------ fins futures JC honeycomb
    MICHEL BOUREZ------------6'2 --thick then thin ------- fins futures JC honeycomb, AM2 techflex heavy chop, ea b/stix at 84kg, now testing AM2 hex
    ALTERNATOR ------ R/F -- 6'4--for bad back days---- fins futures JC honeycomb

    and countless others (mostly nev's)

    youngest grommet 45kgs throws my hellfire around with SA3's or in mush uses EA (techflex "cuz they look da bomb") and deviant

  2. #42
    Elite
    Join Date
    Dec 2011
    Location
    IRELAND
    Posts
    202
    defo
    THE NEW FLEET

    BAKED POTATO WRF 5'9
    SUB SCORCHER FST 6'2
    ALTERNATOR FST 6'6

    36 YR - 5'10 & 90KG

    PREVIOUS FW BOARDS
    5'10 SWEET POTATO,
    5'10 POTATONATOR,
    6'0 FST SPITFIRE,
    5'10 & 6'02 DOM -
    5'04 SWEET POTATO -
    6'04 FLEXFIRE

  3. #43
    Elite Firewire Liaison iggy's Avatar
    Join Date
    Dec 2011
    Location
    Montreal, Canada
    Posts
    1,799
    Quote Originally Posted by surferireland View Post
    Just gone out and bought a shiny new spitfire 6.0, being delivered tomorrow - oh yea
    Yewww
    165cms 89Kgs dry...working on that at the moment...but not working!!! :)
    Potato 5'2" /Vanguard 5'6"/Potatonator 5'8"/ Spitfire 5'8" / Quadraflex 6'0" / Flexflight 9'0"
    Fins: Elevons, Solus, Controlllers, Jordy,AM2,

  4. #44
    Elite Fritzkat's Avatar
    Join Date
    Dec 2011
    Location
    Big Island Hawaii, Kamuela
    Posts
    283
    saxman1
    Do you find that your rusty quad set back fins make your dominator looser than other back quad fins?
    6'-6" (198cm) tall Giraffe, 197 pounds (89kg) Heavy, 50 years young, 37 years surfing 3 days a week avg
    Quiver::: 6-3 Activator RF / 6-4 Dominator RF / 6-4 Hellfire FST / 6-6 Quadra Five FST / 6-8 Rawson Hyperskate II / 6-9 Northern Alliance pintail / 37" Great Wave C-7 Carver
    Fins::: Futures AM-2 fronts (4.79"), V2F4 quad rears (3.75") Rusty quad rears (3.85") Stamps quad rears (4.0")

  5. #45
    Elite Slowman's Avatar
    Join Date
    Dec 2011
    Location
    Sutherland Shire, Sydney, Australia
    Posts
    796
    I use the Rusty quad set too and the rear fins (QR) are very upright and make it quite a loose quad set compared to say a GAM quad set that use a Q1000 (80/20 foiled) rear. The QRs are looser than the GX rear as well.
    Jesus is coming, look busy!
    Moving forward or just spinning faster?

    5'8 RF Vanguard 32.2L FCS H3 quad
    6'0 FST Dominator 34.8L FCS PC SF4 quad + stabiliser
    6'0 FST Spitfire 34.9L FCS PC R2 quad + stabiliser
    6'2 FST Jacknife 33.3L FCS PC quad front/rear TC Redlines/TC Aqualines
    6'2 FST Hellfire 33.7L FCS PC R2 quad + stabiliser (x 2, yes 1 here, 1 there!)
    6'4 FST Alternator 34.?L FCS PG7
    6'7 FST Hellrazor 36.5L FCS R2 thruster
    ------------------------------------------
    6'5 FST Hellrazor 33.5L FCS coming

  6. #46
    Certified
    Join Date
    Feb 2012
    Location
    South Orange County
    Posts
    70
    Quote Originally Posted by Fritzkat View Post
    saxman1
    Do you find that your rusty quad set back fins make your dominator looser than other back quad fins?
    I do feel like it is looser than say my old Simon large set. I used to run the Simons in the front with SF4s in the back to loosen it up. I feel the rusty set is a great blend of drive, hold and looseness. The whole knubster center fin thing is really a game changer for me though. It is making me take a second look at what I want in a quad set up. I might start running my SF4 set with the knubster or try a set of K2.1 with the center fin. Bottom line for me though is the Rusty set suits my style on the Dominator very well. I have yet to give them a go on my quadraflex but I will as soon as I get it back from the ding repair guy.

  7. #47
    Elite Fritzkat's Avatar
    Join Date
    Dec 2011
    Location
    Big Island Hawaii, Kamuela
    Posts
    283
    On the Dominator 6-4 RF (with futures fins) I had tried the stretch quad set (w/4.0 rears)and found it had too much hold to do loose tail-out snaps on small waist to shoulderhigh fun waves. (I sold that Stretch set)
    I inserted the sidebites (@3.23 rears) were a little too loose, not enough hold when bottom turning or a quick pump for speed. they worked fine on a different board that is now broken already I am saving those fins for my kids.
    My V2 F4 fins (w/ 3.75 rears) did not have not enough drive for a small wave. I might combo those into something else or (I am saving those fins for my kids.)
    My Tim stamps quads (w/4.0 rears) work great down the line, but dont loosen up enough on the tail slides

    I have not had the chance yet to ride the Rusty quads (w/3.85 rears) or combo them on the Dominator this season. Being the tail is wider i am experimenting with the rear fins to see what works best on the dominator and other boards. the Rusty Quad rear might be the answer. I am looking for drive and that quick release of the tail on the playful waist to shoulderhigh waves.

    I am going to try the Rusty Quad set (the 4.54 fronts have alot of hold) or combo with the Rusty rears (4.0 rears) with the Stamps front fins (4.46 fronts) or the upright AM-2 (4.79 fronts) that big fin drive which may give more release.


    I have not figured out how the knubster fin fits in to a fin setup and what combo to even start with.

    Quote Originally Posted by saxman1 View Post
    I do feel like it is looser than say my old Simon large set. I used to run the Simons in the front with SF4s in the back to loosen it up. I feel the rusty set is a great blend of drive, hold and looseness. The whole knubster center fin thing is really a game changer for me though. It is making me take a second look at what I want in a quad set up. I might start running my SF4 set with the knubster or try a set of K2.1 with the center fin. Bottom line for me though is the Rusty set suits my style on the Dominator very well. I have yet to give them a go on my quadraflex but I will as soon as I get it back from the ding repair guy.
    Last edited by Fritzkat; 03-16-2012 at 02:26 PM.
    6'-6" (198cm) tall Giraffe, 197 pounds (89kg) Heavy, 50 years young, 37 years surfing 3 days a week avg
    Quiver::: 6-3 Activator RF / 6-4 Dominator RF / 6-4 Hellfire FST / 6-6 Quadra Five FST / 6-8 Rawson Hyperskate II / 6-9 Northern Alliance pintail / 37" Great Wave C-7 Carver
    Fins::: Futures AM-2 fronts (4.79"), V2F4 quad rears (3.75") Rusty quad rears (3.85") Stamps quad rears (4.0")

  8. #48
    Elite
    Join Date
    Dec 2011
    Location
    IRELAND
    Posts
    202
    3a.jpg Brother on his 5'10 Dominator
    THE NEW FLEET

    BAKED POTATO WRF 5'9
    SUB SCORCHER FST 6'2
    ALTERNATOR FST 6'6

    36 YR - 5'10 & 90KG

    PREVIOUS FW BOARDS
    5'10 SWEET POTATO,
    5'10 POTATONATOR,
    6'0 FST SPITFIRE,
    5'10 & 6'02 DOM -
    5'04 SWEET POTATO -
    6'04 FLEXFIRE

  9. #49
    Elite Firewire Liaison prjwebb's Avatar
    Join Date
    Dec 2011
    Location
    Cornwall UK
    Posts
    2,654
    Bet you guys have had some insane waves from this swell. We've had a week straight of clear blues, warm weather and headhigh to slightly overhead offshore waves, but I bet it's been pumping in Ireland.
    6'0" - 77kg - 170lbs
    502R FPT - DL front DS rears
    506D RVG - Soar Powerbase DL
    600Q FTJ/CBD - Soar Powerbase DL
    604R FFE - Soar Powerbase DL

  10. #50
    Elite Slowman's Avatar
    Join Date
    Dec 2011
    Location
    Sutherland Shire, Sydney, Australia
    Posts
    796
    Quote Originally Posted by Fritzkat View Post
    ...

    I have not figured out how the knubster fin fits in to a fin setup and what combo to even start with.
    Start with your loosest quad set, and work from there. Then you'll at least know in which direction to head (looser or stiffer). When it works right you should notice some extra drive, speed and control, without necessarily making things stiffer (well at least that is my experience with my custom made stabiliser which is smaller than the knubster).
    Jesus is coming, look busy!
    Moving forward or just spinning faster?

    5'8 RF Vanguard 32.2L FCS H3 quad
    6'0 FST Dominator 34.8L FCS PC SF4 quad + stabiliser
    6'0 FST Spitfire 34.9L FCS PC R2 quad + stabiliser
    6'2 FST Jacknife 33.3L FCS PC quad front/rear TC Redlines/TC Aqualines
    6'2 FST Hellfire 33.7L FCS PC R2 quad + stabiliser (x 2, yes 1 here, 1 there!)
    6'4 FST Alternator 34.?L FCS PG7
    6'7 FST Hellrazor 36.5L FCS R2 thruster
    ------------------------------------------
    6'5 FST Hellrazor 33.5L FCS coming

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •