Olá Nuno,
sou de Aveiro, tenho uma Firewire Hellfire 6'4.
Se precisares de algumas dicas é só dizer.
Boas ondas.
Renato
Olá Nuno,
sou de Aveiro, tenho uma Firewire Hellfire 6'4.
Se precisares de algumas dicas é só dizer.
Boas ondas.
Renato
any advice?
i usually ride my PU boards short with the wide point further up. thickness is usually 2 1/2 with the widths going in at 18 3/4 to 19 1/12 or thereabouts. between 5'10" - 6'0" ( only stuck on two currently ) i weigh in at 81kgs dry and stick out at about 185cm ( +-6ft?) surfing 3-5 das a week in season in waves from 2 to 6 (maybe 7ft)
Now my question? taking my current two board quiver into account looking at a 602 ALT or thick 600Mb for the better waves or the Hellfire for small wave support and fun? i can only get one now (its pricy here in RSA, but still worth it) should i be going more the performance orientated side of the catalogue? or maybe go for the Hellfire as an "introduction to firewire stoke"
taking into account the board i get will have go in just about anything, i tend to favour boards for long in a myriad of conditions nd def not shy of paddling my 5'10 into waves up to six foor if the board is going well for me. most often here in Cape Town, when the waves come with size they also bring wind rain and plummetting water temps. so i`m always suited up well. it helps therefore that i have confidence in the board i am riding. just looking for a firewire "In" board, so i can grow a quiver frm there.
any advice would be appreciated i realise its a broad question but you have to start somewhere.
cheers
I think all 3 options out have you covered in a range of conditions. Alternator will be a more forgiving but traditional shortboard feel, the MB will be full performance shortboard with some extra volume and the Hellfire will be the more Hybrid feeling board but it's still high performance and will handle good waves.
It comes down more to the type of feel you want from the board and the type of surfing you want to do.
6'0" - 77kg - 170lbs
502R FPT - DL front DS rears
506D RVG - Soar Powerbase DL
600Q FTJ/CBD - Soar Powerbase DL
604R FFE - Soar Powerbase DL
yeah I agree with PRJ here. They are all going to actually work reasonable well in similar conditions just with subtle differences between each one.
In your situation i think its important to look back on your surfing history and choose a board that seems to fit your preferences. To me, you will be most stoked on a board with a bot more performance, especially given where you are geographically. Dial it between the Alternator and Michel!!
6'0 - 175lbs - 29yrs - SoCal -
503 TG Baked Potato - 506 RF Potatonator - 506 WRF Vanguard - 510 FST Unibrow - 600 FST Michel Bourez - 600 FST Alternator - 602 FST Alternator Round - 603 FST Artillery
Firewire Social: Facebook - Twitter - Vimeo - Youtube
Hey All, use my Firewire email, [email protected] for emergency issues, not my forum inbox. However, please avoid contacting me directly with questions on choosing a board, just use the glorious forum. Cheers!
Chris / Prj you guys are legends shot for the advice. the MB is looking like the front runner in this little battle for a new board, mainly beause i like to ride my boards shorter and the MB is designed to be ridden shorter. checked out the video, def looks like a board that can be pushed into and over anything out there! and for CT thats exactly what you need. just one more question, ideally size for the MB to ridden in? it looks like it could work from waist high to a little overhead?
cheers.
1.5x overhead + I reckon. As long as the wave isn't turning it self inside out it'll handle whatever you're comfortable paddling your short board into.
Thanks alot Prj - i`m really excited about riding a board of the volume with a rocker like the Taj Models, i`ve always found that lots of normal boards with high performance rockers dont always cater for bigger guys and you`ll sometimes have to order the particular board "bigger than usual" to get the same volume. the forum also helps alot. any guess hwne CBD will be availible in RSA?
cheers (and onto the MB threads now)
i totally missed these posts...your going to LOVE it mate...
INSTAGRAM .... corepersonaltraining
6ft..90ish kg..35+ years surfing
WHERE'S MY VANGUARD, WHERE'S MY VANGUARD, WHERE'S MY VANGUARD, WHERE'S MY VANGUARD,*WHERE'S MY VANGUARD.... ETC
IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED, IT'S GETTING SPRAYED,
IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED, IT'S BEEN SPRAYED,
IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT, IT'S IN TRANSIT,
IT'S HERE, IT'S HERE IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE, IT'S HERE,
IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE, IT'S HAD A BAPTISM OF FIRE
SWEET POTATO--- R/F -- 5'4 -------------------------- fins controllers
VANGUARD -------- WRF -- 5'6 ------------------------- fins futures ea blackstix..may test something a little bigger and stiffer
HELLFIRE ----------- R/F -- 5'10 ------------------------ fins futures SA3,SA4 honeycomb
FLEXFIRE ----------- R/F -- 6'2 x 18 3/4 x 2 1/2 ------ fins futures JC honeycomb
MICHEL BOUREZ------------6'2 --thick then thin ------- fins futures JC honeycomb, AM2 techflex heavy chop, ea b/stix at 84kg, now testing AM2 hex
ALTERNATOR ------ R/F -- 6'4--for bad back days---- fins futures JC honeycomb
and countless others (mostly nev's)
youngest grommet 45kgs throws my hellfire around with SA3's or in mush uses EA (techflex "cuz they look da bomb") and deviant
Posting Permissions
Reply With Quote