Results 1 to 5 of 5

Thread: FCS fin recommendations for lighter rider

  1. #1
    Certified delmarsurfer's Avatar
    Join Date
    Jul 2012
    Location
    Del Mar, CA
    Posts
    72

    FCS fin recommendations for lighter rider

    Looking for some fin recommendations for my 5'6 Hellfire. Currently using a set of K2.1 thrusters in my Spitfire but was looking at picking up a set of AM-3's for the Hellfire.
    Any thoughts? 140lbs., intermediate, surf SoCal waist to head high.
    Thanks.
    5'3 (160cm), 140lbs (63kg)
    46 years young
    5'6 Chubby Chedda FST w/ FCS
    AM3 thrusters, K 2.1 thrusters

  2. #2
    Elite Firewire Liaison prjwebb's Avatar
    Join Date
    Dec 2011
    Location
    Cornwall UK
    Posts
    2,654
    Have you tried the K2.1s? Those or the JW1s would be good in peaky stuff I reckon.
    I'd also recommend the Soar Powerbase DM as a solid all round set for more lined up stuff.
    6'0" - 77kg - 170lbs
    502R FPT - DL front DS rears
    506D RVG - Soar Powerbase DL
    600Q FTJ/CBD - Soar Powerbase DL
    604R FFE - Soar Powerbase DL

  3. #3
    Certified delmarsurfer's Avatar
    Join Date
    Jul 2012
    Location
    Del Mar, CA
    Posts
    72
    Haven't tried the K2.1's yet and just sold a set of JW-1's last weekend in anticipation of trying a new fin. Oh well.
    Not familiar with the Soar Powerbase fins, have to check them out. Any thoughts on the FCS AM-3's?
    5'3 (160cm), 140lbs (63kg)
    46 years young
    5'6 Chubby Chedda FST w/ FCS
    AM3 thrusters, K 2.1 thrusters

  4. #4
    Elite Firewire Liaison prjwebb's Avatar
    Join Date
    Dec 2011
    Location
    Cornwall UK
    Posts
    2,654
    Personally I've never tried any of the AM templates but feedback always seems to be good.
    6'0" - 77kg - 170lbs
    502R FPT - DL front DS rears
    506D RVG - Soar Powerbase DL
    600Q FTJ/CBD - Soar Powerbase DL
    604R FFE - Soar Powerbase DL

  5. #5
    Elite Slowman's Avatar
    Join Date
    Dec 2011
    Location
    Sutherland Shire, Sydney, Australia
    Posts
    796
    The AM3s look good - that green is HOT!!!! But I suppose you want to know about performance. I've used the G-AM (AM1s in old speak) and coupled with Q1000 quad rears they are great on a very loose board. Good drive, good directional control and great release off the top. I would expect the same out of the thruster set and by extrapolation the AM3s would be similar for your weight. The Hellfire is not the loosest board around but in a thruster set up I think these AM3s might be pretty good. Always hard to say but I like the template, longer turns but the ability is there to snap it out of the longer arc with the release that the fins offer, at least that is what I've found.
    Jesus is coming, look busy!
    Moving forward or just spinning faster?

    5'8 RF Vanguard 32.2L FCS H3 quad
    6'0 FST Dominator 34.8L FCS PC SF4 quad + stabiliser
    6'0 FST Spitfire 34.9L FCS PC R2 quad + stabiliser
    6'2 FST Jacknife 33.3L FCS PC quad front/rear TC Redlines/TC Aqualines
    6'2 FST Hellfire 33.7L FCS PC R2 quad + stabiliser (x 2, yes 1 here, 1 there!)
    6'4 FST Alternator 34.?L FCS PG7
    6'7 FST Hellrazor 36.5L FCS R2 thruster
    ------------------------------------------
    6'5 FST Hellrazor 33.5L FCS coming

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •